mikrokontrollersystemer-prosjekt/prosjekt.X/command-handler.c

#include "command-handler.h"

// Initialize empty, global command context
volatile command_context_t context = {UNKNOWN_COMMAND, SRC_NONE, FAN_NONE,
                                      CNF_NONE};

void parse_command(uint8_t command[], uint8_t command_len) {
  ///////////////////////
  // Command selection //
  ///////////////////////

  // Validate that we have a command
  if (command_len < 1) {
    context.command = UNKNOWN_COMMAND;
  }

  // Extract the first byte, which contains the command
  uint8_t command_byte = command[0];

  // Figure out which command to run
  switch (command_byte) {
  case 0x11: // Read config
    context.command = READ_CONFIG;
    break;
  case 0x12: // Read voltage
    context.command = READ_VOLTAGE;
    break;
  case 0x13: // Read temperature
    context.command = READ_TERMPERATURE;
    break;
  case 0x14: // Read current fan speed
    context.command = READ_FAN_SPEED;
    break;
  case 0x15: // Read bulk fan speed
    context.command = READ_BULK_FAN_SPEED;
    break;
  case 0x21: // Write config
    context.command = WRITE_CONFIG;
    break;
  case 0x22: // Clear stored fan speed data
    context.command = READ_BULK_FAN_SPEED;
    break;
  default: // Unrecognized command
    context.command = UNKNOWN_COMMAND;
    break;
  }

  ///////////////////////////////
  // First parameter selection //
  ///////////////////////////////

  // Check if the command does not require a parameter. If it does not, return.
  if (context.command == READ_TERMPERATURE) {
    return;
  }

  // Validate that we have a first parameter, else requirements for command are
  // not fulfilled. return unknown command.
  if (command_len < 2) {
    context.command = UNKNOWN_COMMAND;
    return;
  }

  // Store the parameter
  uint8_t param = command[1];

  // Extract the parameter. Parameter is dependent on command
  switch (command[0]) {
  // Configuration parameters
  case 0x11: // Read config
  case 0x21: // Write config
    // TODO: Handle parameters for config
    break;

  // Voltage parameters
  case 0x12: // Read voltage
    if (param == 0x01) {
      context.src_voltage = SRC_INTERNAL;
    } else if (param == 0x02) {
      context.src_voltage = SRC_EXTRNAL;
    } else if (param == 0x03) {
      context.src_voltage = SRC_THERMISTOR;
    } else {
      context.src_voltage = SRC_NONE;
    }
    break;

  // Fan parameters
  case 0x14: // Read current fan speed
  case 0x15: // Read bulk fan speed
  case 0x22: // Clear stored fan speed data
    context.command = READ_BULK_FAN_SPEED;
    if (param == 0x01) {
      context.fan = FAN1;
    } else if (param == 0x02) {
      context.fan = FAN2;
    } else {
      context.fan = FAN_NONE;
    }
    break;

  // This should never be reached
  default: // Unrecognized command
    context.command = UNKNOWN_COMMAND;
    break;
  }

  ////////////////////////////////
  // Second parameter selection //
  ////////////////////////////////

  // Check if the command does not require a second parameter. If it does not,
  // return. Only config write requires a second parameter.
  if (context.command != WRITE_CONFIG) {
    return;
  }

  // Validate that we have a first parameter, else requirements for command are
  // not fulfilled. return unknown command.
  if (command_len < 3) {
    context.command = UNKNOWN_COMMAND;
    return;
  }

  // Store the parameter
  param = command[2];

  // TODO: Handle the config parameters

  // exit
  return;
}

uint8_t route_command(int pos) {
 switch (context.command) {
    case WRITE_CONFIG:
      return WRITE_CONFIG;
    case READ_CONFIG:
      return READ_CONFIG;
    case READ_VOLTAGE:
      return READ_VOLTAGE;
    case READ_TERMPERATURE:
      return READ_TERMPERATURE;
    case READ_FAN_SPEED:
        if (context.fan == FAN1) {
            return fan1_history[0];
        } else if (context.fan == FAN2) {
            return fan2_history[0];
        } else {
            return 0;
        }
        break;        
    case READ_BULK_FAN_SPEED:
        if (context.fan == FAN1) {
            return fan1_history[pos];
        } else if (context.fan == FAN2) {
            return fan2_history[pos];
        } else {
            return 0;
        }
        break;
    case UNKNOWN_COMMAND:
    default:
      return 0xFF;
  }
}