/* 
 * File:   main.c
 * Author: Sebastian H. Gabrielli
 *
 * Created on March 6, 2024, 12:34 PM
 */
/* 
 * File:   main.c
 * Author: athamantis
 *
 * Created on 01 March 2024, 10:34
 */

#include "eeprom.h"
#include <avr/io.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#define F_CPU 4E6
#include <util/delay.h>
#include <avr/eeprom.h>
#include <stdbool.h>
#define USART3_BAUD_RATE(BAUD_RATE) ((float)(F_CPU * 64 / (16 *(float) BAUD_RATE)) + 0.5)
#include <string.h>

// Init UART comunication
void USART3_init(void) {
    // Enable resiver pin
    PORTB.DIR &= ~PIN1_bm;
    // Enable sender pin
    PORTB.DIR |= PIN0_bm;
    USART3.BAUD = (uint16_t) USART3_BAUD_RATE(115200);
    USART3.CTRLB |= USART_TXEN_bm;

    // Enabled in the USART register
    USART3.CTRLB |= USART_RXEN_bm;
}

// Use printline __________________________
static void USART3_sendChar(char c) {
    while (!(USART3.STATUS & USART_DREIF_bm)) {
        ;
    }
    USART3.TXDATAL = c;
}

static int USART3_printChar(char c, FILE *stream) {
    USART3_sendChar(c);
    return 0;
}
static FILE USART_stream = FDEV_SETUP_STREAM(USART3_printChar, NULL, _FDEV_SETUP_WRITE);

uint8_t USART3_read() {
    while (!(USART3.STATUS & USART_RXCIF_bm)) {
        ;
    }
    return USART3.RXDATAL;
}

/*
 * make a struct
 * a space is reserved for that struct
 * make a function that write the struct to the space
 * 
 * a running counter for where the fanspeed data should be set
 * make a function that write the mesured fanSpeed
 * 
 * read the memory for the struct
 * read the memory for the fanspeed
 */


void main() {
    USART3_init();
    stdout = &USART_stream;
    
    config_t fanController; 
        
    fanController.fanSpeed = 8; 
    
    while(1){
        printf("in loop\n");
        printf("Write the struct \n");
        WriteStructInEEPROM(fanController);

        printf("Read struct\n");
        config_t recivedFancontroller = ReadStructInEEPROM();

        printf("writing in eeprom\n");
        WriteFanSpeedInEEPROM(2);
        WriteFanSpeedInEEPROM(3);
        WriteFanSpeedInEEPROM(5);

        printf("reading from eeprom\n");
        ReadFanSpeedInfo(); 
        _delay_ms(500);
   }
}