#include "eeprom.h"

// The start address for the controller data
uint8_t EEMEM startAddressController = 0x00;

// Where the writing of the fans points start
uint8_t EEMEM startAddressFan1 = 0x30;
uint8_t EEMEM startAddressFan2 = 0x60;

// The placement for the next datapoint form the fans.
uint8_t EEMEM currentAddressFan1 = 0x30; 
uint8_t EEMEM currentAddressFan2 = 0x60;

// Checks if its written a struct in the memmory space. 
bool alreadyWrittenABlock = false;

// Checks if the EEPROM memory is ready to be written in. 
void checkEEpromIsReady(){
    while(1){
        if (eeprom_is_ready()){
            break;
            printf("it is");
        }else{
            ;
            printf("its not");
        }
    }
}


// Takes inn a struct by the form of config_t
// Checks if the eeprom is ready to be written in
// Checks if it has been written information at the address
// If true, the infromation is replaced with the intaken struct
// else the intaken struct is written at the address. 
void WriteStructInEEPROM(config_t writeStruct){
    uint8_t structSize; 
    structSize = sizeof(writeStruct);
    
    checkEEpromIsReady();
    
    if (alreadyWrittenABlock){
        eeprom_update_block((void*) &writeStruct,(void*) &startAddressController, structSize);
    }else{
        eeprom_write_block((void*)&writeStruct,(void*) &startAddressController, structSize);
        alreadyWrittenABlock = true;
    }
}

// Reads the memory block at the address 0x00
// returns a struct in form of config_t
config_t ReadStructInEEPROM(){
    //is eeprom ready??
    config_t readStruct;
    uint8_t structsize = sizeof(readStruct);
    
    checkEEpromIsReady();
    
    eeprom_read_block((void *) &readStruct,(void*) &startAddressController, structsize);
    return readStruct;
}

// Takes inn a dataPoint and what data set it belongs to
// checks if EEPROM is ready
// If the dataset is 1, the datapoint is written at the address. 
// If the dataset is 2 its written at another point. 
void WriteDataPointInEEPROM(uint8_t dataPoint, uint8_t data){
    
    checkEEpromIsReady();
    if (data == 1){
        eeprom_write_byte(currentAddressFan1, dataPoint);
        currentAddressFan1++;
    } else if (data == 2){
        eeprom_write_byte(currentAddressFan2, dataPoint);
        currentAddressFan2++;
    } else{
        // error???
        ;
    }
}

// Reads all the datapoints to the choosen data. 
// it writes the data points in the USART stream.
void ReadDataPointSpeedInfo(uint8_t data){
    uint8_t dataPoint = 0;
    
    if (data == 1){
        uint8_t len = currentAddressFan1 - startAddressFan1;

        checkEEpromIsReady();

        for (uint8_t i = 0; i <len; i++){
            dataPoint = eeprom_read_byte(i);
            printf("Fanspeed nr %u : %u", i, dataPoint);
        }
    } else if (data == 2){
        uint8_t len = currentAddressFan2 - startAddressFan2;
        checkEEpromIsReady();

        for (uint8_t i = 0; i <len; i++){
            dataPoint = eeprom_read_byte(i);
            printf("Fanspeed nr %u : %u", i, dataPoint);
        }
    }
}