change init func

prosjekt.X/fan_speeeed.c

@@ -6,9 +6,9 @@ uint16_t fan_speed;
 volatile uint16_t falling_edge_counter = 0;
 
 void TCA0_init() {
-TCA0.SINGLE.INTCTRL = TCA_SINGLE_OVF_bm ;
+    TCA0.SINGLE.INTCTRL = TCA_SINGLE_OVF_bm ;
-TCA0.SINGLE.CTRLA = TCA_SINGLE_ENABLE_bm | TCA_SINGLE_CLKSEL_DIV1024_gc ; /* Sysclk /1024 */
+    TCA0.SINGLE.CTRLA = TCA_SINGLE_ENABLE_bm | TCA_SINGLE_CLKSEL_DIV1024_gc ; /* Sysclk /1024 */
-TCA0_update_period_ms();
+    TCA0_update_period_ms();
 }
 
 void TCA0_update_period_ms() {
@@ -60,12 +60,17 @@ void PORT_init(){
     EVSYS.CHANNEL0 = 0x40;
     //EVSYS.SWEVENTA = 0x01;
     EVSYS.USERTCB3CAPT = 0x01;
+        /* Zero-cross detector 0 out linked to event channel 0 */
+    EVSYS.CHANNEL0 = EVSYS_CHANNEL0_PORTA_PIN5_gc;
+    /* TCB uses event channel 0 */
+    //EVSYS.USERTCB0CAPT = EVSYS_USER_CHANNEL0_gc;
     
     //RUNSTDBY disabled; CASCADE disabled; SYNCUPD disabled; CLKSEL DIV1; ENABLE enabled; 
     TCB3.CTRLA = 0x01;
+    
 }
 
-void TCB0_Init(void){
+void TCB0_Init(){
     TCB3.CTRLB = TCB_CNTMODE_FRQPW_gc;    /* Input Capture Frequency */
     TCB3.EVCTRL = TCB_CAPTEI_bm;        /* Event Input Enable: enabled */ 
     TCB3.EVCTRL |= (1 << TCB_CAPTEI_bp | 1 << TCB_EDGE_bp | 1 << TCB_FILTER_bp);  /* Event Input Enable: enabled */ 
@@ -74,15 +79,15 @@ void TCB0_Init(void){
           | TCB_ENABLE_bm    /* Enable: enabled */
           | TCB_RUNSTDBY_bm;  /* Run Standby: enabled */
 } 
-void EVSYS_Init(void)
+void EVSYS_Init()
 {
     /* Zero-cross detector 0 out linked to event channel 0 */
-    EVSYS.CHANNEL0 = EVSYS_CHANNEL0_PORTA_PIN5_gc;
+   // EVSYS.CHANNEL0 = EVSYS_CHANNEL0_PORTA_PIN5_gc;
     /* TCB uses event channel 0 */
-    EVSYS.USERTCB0CAPT = EVSYS_USER_CHANNEL0_gc;
+    //EVSYS.USERTCB0CAPT = EVSYS_USER_CHANNEL0_gc;
 }
  
-void PORT_Init(void)
+void PORT_Init1()
 {
     PORTB.OUTSET |= PIN5_bm;
     PORTB.DIRSET |= PIN5_bm;  

prosjekt.X/fan_speeeed.h

@@ -26,6 +26,10 @@ extern "C" {
     
     void TCA0_init ();
     void PORT_init();
+    void TCB0_Init(); 
+    void PORT_init1();
+    void EVSYS_Init();
+
     
     void TCA0_update_period_ms ();
     uint16_t RPM_calculation();

prosjekt.X/main.c

@@ -29,13 +29,19 @@
 int main() {
     init_uart((uint16_t)9600);
     stdout = &USART_stream;
-    TCA0_init ();
+    //TCA0_init ();
     //PORT_init();  
     //test
     
-    TCB0_Init();
+  //TCB0_Init();
-  EVSYS_Init();
+  //EVSYS_Init();
-  PORT_Init();
+  //PORT_Init1();
+  TCA0_init ();
+  PORT_init();
+  //TCB0_Init(); 
+  PORT_init1();
+  //EVSYS_Init();
+  
   TCB3.INTCTRL = 0b00000001;     // Bit 0 ? CAPT Capture Interrupt Enable
   
      sei();

prosjekt.X/nbproject/configurations.xml

@@ -4,10 +4,10 @@
     <logicalFolder name="HeaderFiles"
                    displayName="Header Files"
                    projectFiles="true">
-      <itemPath>uart.h</itemPath>
       <itemPath>voltage.h</itemPath>
       <itemPath>fan_speeeed.h</itemPath>
       <itemPath>themistor-temp.h</itemPath>
+      <itemPath>uart.h</itemPath>
     </logicalFolder>
     <logicalFolder name="ExternalFiles"
                    displayName="Important Files"
@@ -23,10 +23,10 @@
                    displayName="Source Files"
                    projectFiles="true">
       <itemPath>main.c</itemPath>
-      <itemPath>uart.c</itemPath>
       <itemPath>voltage.c</itemPath>
       <itemPath>fan_speeeed.c</itemPath>
       <itemPath>thermistor-temp.c</itemPath>
+      <itemPath>uart.c</itemPath>
     </logicalFolder>
   </logicalFolder>
   <projectmakefile>Makefile</projectmakefile>