Merge branch 'fanspeed-comparator'

add referance

prosjekt.X/fan_speeeed.c

@@ -0,0 +1,107 @@
+#include "fan_speeeed.h"
+#include "uart.h"
+
+uint16_t timer_period_ms = 1;
+uint16_t fan_speed = 0;
+volatile uint16_t fan1_edge_counter = 0;
+volatile uint16_t fan2_edge_counter = 0;
+
+
+void init_TCA0() {
+    TCA0.SINGLE.INTCTRL = TCA_SINGLE_OVF_bm ;
+    TCA0.SINGLE.CTRLA = TCA_SINGLE_ENABLE_bm | TCA_SINGLE_CLKSEL_DIV1024_gc ; /* Sysclk /1024 */
+    TCA0_update_period(timer_period_ms);
+}
+
+void TCA0_update_period(uint16_t timer_period) {
+    TCA0.SINGLE.PERBUF = (F_CPU * (1 / timer_period) / 1024); /* F_CPU * F_IRQ / TCA_prescaler */
+}
+
+// COUNTINGS / TIME = FREQUENCY
+// FREQ / 2 = GIVES ACTUAL FREQ
+// FREQ * SEC-IN-A-MINUTE(60) / FAN-BLADES
+uint16_t RPM_calculation(uint16_t edge_counter, uint16_t time_ms) {
+    fan_speed = (edge_counter / time_ms);
+    fan_speed = fan_speed/2; 
+    fan_speed = fan_speed * 60/5;
+    edge_counter = 0;
+    return fan_speed;
+}
+
+
+void init_fan_gpio() {
+    // CONFIGURE PINS AS ANALOG INPUTS
+    
+    // PIN FOR FAN 1
+    PORTD.DIRSET &= ~PIN6_bm;
+    PORTD.PIN6CTRL &= ~ PORT_ISC_gm;
+    PORTD.PIN6CTRL = PORT_ISC_INPUT_DISABLE_gc;
+    
+    // PIN FOR FAN 2
+    PORTD.DIRSET &= ~PIN4_bm;
+    PORTD.PIN4CTRL &= ~ PORT_ISC_gm ;
+    PORTD.PIN4CTRL = PORT_ISC_INPUT_DISABLE_gc;
+    
+    // PIN FOR REFRENCE
+    PORTD.DIRSET &= PIN7_bm;
+    PORTD.PIN7CTRL &= ~ PORT_ISC_gm ;
+    PORTD.PIN7CTRL = PORT_ISC_INPUT_DISABLE_gc;
+}
+
+void init_AC0(){ 
+    //Wincontroll disabled
+    AC0.CTRLB = 0x00;
+    
+    //SELECT POSITIVE AND NEGATIVE INPUTS FOR COMPARRISON
+    // FAN USE PD6 COMPARE WITH PD3
+    AC0.MUXCTRL = AC_MUXPOS_AINP3_gc | AC_MUXNEG_AINN2_gc;
+    
+    // ENABLE AC BY WRITING 1 TO ENABLE BIT IN ACN.CTRLA
+    AC0.CTRLA = AC_ENABLE_bm | AC_INTMODE_NORMAL_POSEDGE_gc | AC_OUTEN_bm;
+    
+    // TURN ON INTERUPT
+    AC0.INTCTRL = 0x01; 
+}
+
+
+void init_AC1(){    
+    //Wincontroll disabled
+    AC1.CTRLB = 0x00;
+    
+    //SELECT POSITIVE AND NEGATIVE INPUTS FOR COMPARRISON
+    // FAN USE PD4, COMPARE WITH PD3
+    AC1.MUXCTRL = AC_MUXPOS_AINP2_gc | AC_MUXNEG_AINN2_gc;
+    
+    // ENABLE AC BY WRITING 1 TO ENABLE BIT IN ACN.CTRLA
+    AC1.CTRLA = AC_ENABLE_bm | AC_INTMODE_NORMAL_POSEDGE_gc | AC_OUTEN_bm;
+    
+    // TURN ON INTERUPT
+    AC1.INTCTRL = 0x01; 
+}
+
+
+ISR(AC0_AC_vect){ // AC0 vec flag 
+    cli();
+    fan1_edge_counter++;
+    AC0.STATUS |= 0x10; //CMP flag to 0
+    sei();
+}
+
+
+ISR(AC1_AC_vect){ // AC1 vec flag 
+    cli();
+    fan2_edge_counter++;
+    AC1.STATUS |= 0x10; //CMP flag to 0
+    sei();
+}
+
+// TIMER INTERUPT
+ISR (TCA0_OVF_vect) {
+    cli();
+    RPM_calculation(fan1_edge_counter,timer_period_ms);
+    RPM_calculation(fan2_edge_counter,timer_period_ms);
+    fan1_edge_counter = 0;
+    fan2_edge_counter = 0;
+    TCA0.SINGLE.INTFLAGS = TCA_SINGLE_OVF_bm ;
+    sei();
+}

prosjekt.X/fan_speeeed.h

@@ -0,0 +1,57 @@
+/* 
+ * File:   fanseeeed.h
+ * Author: inami, Helle Augland Grasmo
+ *
+ * Created on 13. mars 2024, 13:38
+ */
+
+
+
+#ifndef FANSEEEED_H
+#define	FANSEEEED_H
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#include <stdbool.h>
+#include <float.h>    
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <math.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+    
+    /*
+     The code has inspiration from "Getting Started with Analog comparator(AC)" by Microchip for setting up analog comparrator. 
+     *          web link: https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ApplicationNotes/ApplicationNotes/TB3211-Getting-Started-with-AC-DS90003211.pdf
+     * and inspiration form practice 6 for TCA0 setup
+     */
+    
+    
+    // INITALICE TIMER COUNTER
+    void init_TCA0();    
+    
+    // UPDATE TIMER PERIOD
+    void TCA0_update_period_ms (uint16_t timer_period);
+    
+    // TAKES INN A TIME AND A THE COUNTED FAN DIPS 
+    // RETURNS THE RPM OF THE FAN
+    uint16_t RPM_calculation(uint16_t edge_counter, uint16_t time_ms);
+    
+    // INITIALISING FAN PORTS
+    void init_fan_gpio();
+    
+    // INIT AC0 TO COMPARE PD6 AND PD7
+    void init_AC0();
+    
+    // INIT AC1 TO COMPARE PD4 AND PD7 
+    void init_AC1();
+    
+#ifdef	__cplusplus
+}
+#endif
+
+#endif	/* FANSEEEED_H */
+

prosjekt.X/main.c

@@ -4,9 +4,9 @@
  *
  * Created on March 6, 2024, 12:34 PM
  */
-#include <stdbool.h>
 #include "uart.h"
 #include "voltage.h"
+#include <stdbool.h>
 #define RTC_PERIOD (511)
 #define DELAY_TIME 1000
 #include "eeprom.h"

prosjekt.X/nbproject/configurations.xml

@@ -4,17 +4,19 @@
     <logicalFolder name="HeaderFiles"
                    displayName="Header Files"
                    projectFiles="true">
-      <itemPath>command-handler.h</itemPath>
-      <itemPath>i2c.h</itemPath>
-      <itemPath>themistor-temp.h</itemPath>
       <itemPath>uart.h</itemPath>
-      <itemPath>eeprom.h</itemPath>
       <itemPath>voltage.h</itemPath>
+      <itemPath>fan_speeeed.h</itemPath>
+      <itemPath>themistor-temp.h</itemPath>
+      <itemPath>command-handler.h</itemPath>
+      <itemPath>eeprom.h</itemPath>
+      <itemPath>i2c.h</itemPath>
     </logicalFolder>
     <logicalFolder name="ExternalFiles"
                    displayName="Important Files"
                    projectFiles="true">
       <itemPath>Makefile</itemPath>
+      <itemPath>prosjekt.mc3</itemPath>
     </logicalFolder>
     <logicalFolder name="LinkerScript"
                    displayName="Linker Files"
@@ -25,11 +27,12 @@
                    projectFiles="true">
       <itemPath>main.c</itemPath>
       <itemPath>uart.c</itemPath>
-      <itemPath>eeprom.c</itemPath>
       <itemPath>voltage.c</itemPath>
-      <itemPath>i2c.c</itemPath>
+      <itemPath>fan_speeeed.c</itemPath>
-      <itemPath>command-handler.c</itemPath>
       <itemPath>thermistor-temp.c</itemPath>
+      <itemPath>command-handler.c</itemPath>
+      <itemPath>i2c.c</itemPath>
+      <itemPath>eeprom.c</itemPath>
     </logicalFolder>
   </logicalFolder>
   <projectmakefile>Makefile</projectmakefile>
@@ -42,11 +45,11 @@
         <targetPluginBoard></targetPluginBoard>
         <platformTool>nEdbgTool</platformTool>
         <languageToolchain>XC8</languageToolchain>
-        <languageToolchainVersion>2.46</languageToolchainVersion>
+        <languageToolchainVersion>2.45</languageToolchainVersion>
         <platform>2</platform>
       </toolsSet>
       <packs>
-        <pack name="AVR-Dx_DFP" vendor="Microchip" version="2.3.272"/>
+        <pack name="AVR-Dx_DFP" vendor="Microchip" version="2.4.286"/>
       </packs>
       <ScriptingSettings>
       </ScriptingSettings>
@@ -111,6 +114,7 @@
       </HI-TECH-COMP>
       <HI-TECH-LINK>
         <property key="additional-options-checksum" value=""/>
+        <property key="additional-options-checksumAVR" value=""/>
         <property key="additional-options-code-offset" value=""/>
         <property key="additional-options-command-line" value=""/>
         <property key="additional-options-errata" value=""/>
@@ -156,7 +160,54 @@
         <property key="remove-unused-sections" value="true"/>
       </HI-TECH-LINK>
       <Tool>
+        <property key="AutoSelectMemRanges" value="auto"/>
+        <property key="communication.activationmode" value="nohv"/>
+        <property key="communication.interface" value="updi"/>
+        <property key="communication.speed" value="0,500"/>
+        <property key="debugoptions.debug-startup" value="Use system settings"/>
+        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
         <property key="debugoptions.useswbreakpoints" value="true"/>
+        <property key="event.recorder.debugger.behavior" value="Running"/>
+        <property key="event.recorder.enabled" value="false"/>
+        <property key="event.recorder.scvd.files" value=""/>
+        <property key="firmware.path"
+                  value="Press to browse for a specific firmware version"/>
+        <property key="firmware.toolpack"
+                  value="Press to select which tool pack to use"/>
+        <property key="firmware.update.action" value="firmware.update.use.latest"/>
+        <property key="freeze.timers" value="false"/>
+        <property key="lastid" value=""/>
+        <property key="memories.aux" value="false"/>
+        <property key="memories.bootflash" value="true"/>
+        <property key="memories.configurationmemory" value="true"/>
+        <property key="memories.configurationmemory2" value="true"/>
+        <property key="memories.dataflash" value="true"/>
+        <property key="memories.eeprom" value="true"/>
+        <property key="memories.exclude.configurationmemory" value="true"/>
+        <property key="memories.flashdata" value="true"/>
+        <property key="memories.id" value="true"/>
+        <property key="memories.instruction.ram.ranges"
+                  value="${memories.instruction.ram.ranges}"/>
+        <property key="memories.programmemory" value="true"/>
+        <property key="memories.programmemory.ranges" value="0-ffff"/>
+        <property key="poweroptions.powerenable" value="false"/>
+        <property key="programmerToGoFilePath"
+                  value="C:/Users/inami/Documents/mikrokontrollersystemer-prosjekt/prosjekt.X/debug/default/prosjekt_ptg"/>
+        <property key="programoptions.eraseb4program" value="true"/>
+        <property key="programoptions.preservedataflash" value="false"/>
+        <property key="programoptions.preservedataflash.ranges"
+                  value="${memories.dataflash.default}"/>
+        <property key="programoptions.preserveeeprom" value="false"/>
+        <property key="programoptions.preserveeeprom.ranges" value="1400-15ff"/>
+        <property key="programoptions.preserveprogram.ranges" value=""/>
+        <property key="programoptions.preserveprogramrange" value="false"/>
+        <property key="programoptions.preserveuserid" value="false"/>
+        <property key="programoptions.programuserotp" value="false"/>
+        <property key="toolpack.updateoptions"
+                  value="toolpack.updateoptions.uselatestoolpack"/>
+        <property key="toolpack.updateoptions.packversion"
+                  value="Press to select which tool pack to use"/>
+        <property key="voltagevalue" value=""/>
       </Tool>
       <XC8-CO>
         <property key="coverage-enable" value=""/>
@@ -181,7 +232,52 @@
         <property key="wpo-lto" value="false"/>
       </XC8-config-global>
       <nEdbgTool>
+        <property key="AutoSelectMemRanges" value="auto"/>
+        <property key="communication.activationmode" value="nohv"/>
+        <property key="communication.interface" value="updi"/>
+        <property key="communication.speed" value="0,500"/>
+        <property key="debugoptions.debug-startup" value="Use system settings"/>
+        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
         <property key="debugoptions.useswbreakpoints" value="true"/>
+        <property key="event.recorder.debugger.behavior" value="Running"/>
+        <property key="event.recorder.enabled" value="false"/>
+        <property key="event.recorder.scvd.files" value=""/>
+        <property key="firmware.path"
+                  value="Press to browse for a specific firmware version"/>
+        <property key="firmware.toolpack"
+                  value="Press to select which tool pack to use"/>
+        <property key="firmware.update.action" value="firmware.update.use.latest"/>
+        <property key="freeze.timers" value="false"/>
+        <property key="lastid" value=""/>
+        <property key="memories.aux" value="false"/>
+        <property key="memories.bootflash" value="true"/>
+        <property key="memories.configurationmemory" value="true"/>
+        <property key="memories.configurationmemory2" value="true"/>
+        <property key="memories.dataflash" value="true"/>
+        <property key="memories.eeprom" value="true"/>
+        <property key="memories.exclude.configurationmemory" value="true"/>
+        <property key="memories.flashdata" value="true"/>
+        <property key="memories.id" value="true"/>
+        <property key="memories.instruction.ram.ranges"
+                  value="${memories.instruction.ram.ranges}"/>
+        <property key="memories.programmemory" value="true"/>
+        <property key="memories.programmemory.ranges" value="0-ffff"/>
+        <property key="poweroptions.powerenable" value="false"/>
+        <property key="programoptions.eraseb4program" value="true"/>
+        <property key="programoptions.preservedataflash" value="false"/>
+        <property key="programoptions.preservedataflash.ranges"
+                  value="${memories.dataflash.default}"/>
+        <property key="programoptions.preserveeeprom" value="false"/>
+        <property key="programoptions.preserveeeprom.ranges" value="1400-15ff"/>
+        <property key="programoptions.preserveprogram.ranges" value=""/>
+        <property key="programoptions.preserveprogramrange" value="false"/>
+        <property key="programoptions.preserveuserid" value="false"/>
+        <property key="programoptions.programuserotp" value="false"/>
+        <property key="toolpack.updateoptions"
+                  value="toolpack.updateoptions.uselatestoolpack"/>
+        <property key="toolpack.updateoptions.packversion"
+                  value="Press to select which tool pack to use"/>
+        <property key="voltagevalue" value=""/>
       </nEdbgTool>
     </conf>
   </confs>

prosjekt.X/voltage.c

@@ -56,14 +56,3 @@ uint16_t internal_voltage_read() {
 
   return adc_val * 10;
 }
-
-/* Takes inn a messured value and converts it to voltage */
-uint16_t convert_to_voltage(uint16_t adc_val){
-    uint16_t min_in= 0;
-    uint16_t min_out= 0;
-    uint16_t max_in= 1023;
-    uint16_t max_out= 3.3;
-    uint16_t voltage = (adc_val-min_in)*(max_out-min_out)/(max_in-min_in) + min_out;
-    return voltage;
-    
-}