From 4a8b6137d140fee8638b974935649dee05830b58 Mon Sep 17 00:00:00 2001
From: Elp03 <helle@grasmo.no>
Date: Wed, 13 Mar 2024 11:48:58 +0100
Subject: [PATCH] Change namingsheme

---
 prosjekt.X/eeprom.c                     | 68 ++++++++++++-------------
 prosjekt.X/eeprom.h                     | 10 ++--
 prosjekt.X/nbproject/configurations.xml |  2 +-
 3 files changed, 39 insertions(+), 41 deletions(-)

diff --git a/prosjekt.X/eeprom.c b/prosjekt.X/eeprom.c
index 2cc7d24..4eea0c2 100644
--- a/prosjekt.X/eeprom.c
+++ b/prosjekt.X/eeprom.c
@@ -1,25 +1,23 @@
 #include "eeprom.h"
 
 // The start address for the controller data
-uint8_t EEMEM startAddressController = 0x00;
+uint8_t EEMEM start_address_controller = 0x00;
 
 // Where the writing of the fans points start
-uint8_t EEMEM startAddressFan1 = 0x30;
-uint8_t EEMEM startAddressFan2 = 0x60;
+uint8_t EEMEM start_address_fan1 = 0x30;
+uint8_t EEMEM start_address_fan2 = 0x60;
 
 // The placement for the next datapoint form the fans.
-uint8_t EEMEM currentAddressFan1 = 0x30; 
-uint8_t EEMEM currentAddressFan2 = 0x60;
+uint8_t EEMEM current_address_fan1 = 0x30; 
+uint8_t EEMEM current_address_fan2 = 0x60;
 
 // Checks if the EEPROM memory is ready to be written in. 
-void checkEEpromIsReady(){
+void check_eeprom_is_ready(){
     while(1){
         if (eeprom_is_ready()){
             break;
-            printf("it is");
         }else{
             ;
-            printf("its not");
         }
     }
 }
@@ -30,42 +28,42 @@ void checkEEpromIsReady(){
 // Checks if it has been written information at the address
 // If true, the infromation is replaced with the intaken struct
 // else the intaken struct is written at the address. 
-void WriteStructInEEPROM(config_t writeStruct){
-    uint8_t structSize; 
-    structSize = sizeof(writeStruct);
+void write_struct_in_EEPROM(config_t write_struct){
+    uint8_t struct_size; 
+    struct_size = sizeof(write_struct);
     
-    checkEEpromIsReady();
+    check_eeprom_is_ready();
     
-    eeprom_update_block((void*) &writeStruct,(void*) &startAddressController, structSize);
+    eeprom_update_block((void*) &write_struct,(void*) &start_address_controller, struct_size);
    
 }
 
 // Reads the memory block at the address 0x00
 // returns a struct in form of config_t
-config_t ReadStructInEEPROM(){
+config_t read_struct_from_EEPROM(){
     //is eeprom ready??
-    config_t readStruct;
-    uint8_t structsize = sizeof(readStruct);
+    config_t read_struct;
+    uint8_t struct_size = sizeof(read_struct);
     
-    checkEEpromIsReady();
+    check_eeprom_is_ready();
     
-    eeprom_read_block((void *) &readStruct,(void*) &startAddressController, structsize);
-    return readStruct;
+    eeprom_read_block((void *) &read_struct,(void*) &start_address_controller, struct_size);
+    return read_struct;
 }
 
 // Takes inn a dataPoint and what data set it belongs to
 // checks if EEPROM is ready
 // If the dataset is 1, the datapoint is written at the address. 
 // If the dataset is 2 its written at another point. 
-void WriteDataPointInEEPROM(uint8_t dataPoint, uint8_t data){
+void write_data_point_in_EEPROM(uint8_t data_point, uint8_t data){
     
-    checkEEpromIsReady();
+    check_eeprom_is_ready();
     if (data == 1){
-        eeprom_update_byte(currentAddressFan1, dataPoint);
-        currentAddressFan1++;
+        eeprom_update_byte(current_address_fan1, data_point);
+        current_address_fan1++;
     } else if (data == 2){
-        eeprom_update_byte(currentAddressFan2, dataPoint);
-        currentAddressFan2++;
+        eeprom_update_byte(current_address_fan2, data_point);
+        current_address_fan2++;
     } else{
         // error???
         ;
@@ -74,25 +72,25 @@ void WriteDataPointInEEPROM(uint8_t dataPoint, uint8_t data){
 
 // Reads all the datapoints to the choosen data. 
 // it writes the data points in the USART stream.
-void ReadDataPointSpeedInfo(uint8_t data){
-    uint8_t dataPoint = 0;
+void read_data_point_speed_info(uint8_t data){
+    uint8_t data_point = 0;
     
     if (data == 1){
-        uint8_t len = currentAddressFan1 - startAddressFan1;
+        uint8_t len = current_address_fan1 - start_address_fan1;
 
-        checkEEpromIsReady();
+        check_eeprom_is_ready();
 
         for (uint8_t i = 0; i <len; i++){
-            dataPoint = eeprom_read_byte(i);
-            printf("Fanspeed nr %u : %u", i, dataPoint);
+            data_point = eeprom_read_byte(i);
+            printf("Fanspeed nr %u : %u", i, data_point);
         }
     } else if (data == 2){
-        uint8_t len = currentAddressFan2 - startAddressFan2;
-        checkEEpromIsReady();
+        uint8_t len = current_address_fan2 - start_address_fan2;
+        check_eeprom_is_ready();
 
         for (uint8_t i = 0; i <len; i++){
-            dataPoint = eeprom_read_byte(i);
-            printf("Fanspeed nr %u : %u", i, dataPoint);
+            data_point = eeprom_read_byte(i);
+            printf("Fanspeed nr %u : %u", i, data_point);
         }
     }
 }
diff --git a/prosjekt.X/eeprom.h b/prosjekt.X/eeprom.h
index d1ce0ce..f3c7b7a 100644
--- a/prosjekt.X/eeprom.h
+++ b/prosjekt.X/eeprom.h
@@ -27,19 +27,19 @@ typedef struct {
 } config_t;
 
 // Check if EEPROM is ready to be written in
-void checkEEpromIsReady();
+void check_eeprom_is_ready();
 
 // Writes a struct in EEPROM
-void WriteStructInEEPROM(config_t writeStruct);
+void write_struct_in_EEPROM(config_t write_struct);
 
 // Read data from EEPROM and return it as a controller struct
-config_t ReadStructInEEPROM();
+config_t read_struct_from_EEPROM();
 
 // Writes a datapoint in EEPROM
-void WriteDataPointInEEPROM(uint8_t dataPoint, uint8_t data);
+void write_data_point_in_EEPROM(uint8_t data_point, uint8_t data);
 
 // Reads all the dataPoints form EEPROM
-void ReadDataPointSpeedInfo(uint8_t data);
+void read_data_point_speed_info(uint8_t data);
 
 
 #ifdef	__cplusplus
diff --git a/prosjekt.X/nbproject/configurations.xml b/prosjekt.X/nbproject/configurations.xml
index 808b914..a393dff 100644
--- a/prosjekt.X/nbproject/configurations.xml
+++ b/prosjekt.X/nbproject/configurations.xml
@@ -4,6 +4,7 @@
     <logicalFolder name="HeaderFiles"
                    displayName="Header Files"
                    projectFiles="true">
+      <itemPath>eeprom.h</itemPath>
     </logicalFolder>
     <logicalFolder name="LinkerScript"
                    displayName="Linker Files"
@@ -13,7 +14,6 @@
                    displayName="Source Files"
                    projectFiles="true">
       <itemPath>main.c</itemPath>
-      <itemPath>eeprom.h</itemPath>
       <itemPath>eeprom.c</itemPath>
     </logicalFolder>
     <logicalFolder name="ExternalFiles"