MCC does not work

prosjekt.X/fan_speeeed.c

@@ -23,11 +23,42 @@ uint16_t RPM_calculation() {
 }
 
 void PORT_init(){
-    PORTD.PIN2CTRL = PORT_ISC_FALLING_gc;
+    //compare or capture
+    TCB3.CCMP = 0x00;
+    //count
+    TCB3.CNT = 0x00;
+    
+    
+    //PORTD.PIN2CTRL = PORT_ISC_FALLING_gc | 0b01000000;
+//	TCB3.CTRLB =0<< TCB_ASYNC_bp       /* Asynchronous Enable: disabled */|0<< TCB_CCMPEN_bp    /* Pin Output Enable: disabled */|0<< TCB_CCMPINIT_bp  /* Pin Initial State: disabled */| TCB_CNTMODE_FRQ_gc;/* Input Capture Frequency measurement */
+//	TCB3.EVCTRL =1<< TCB_CAPTEI_bp    /* Event Input Enable: enabled */|0<< TCB_EDGE_bp    /* Event Edge: disabled */|0<< TCB_FILTER_bp;/* Input Capture Noise Cancellation Filter: disabled */
+//	TCB3.INTCTRL =1<< TCB_CAPT_bp     /* Capture or Timeout: enabled */|0<< TCB_OVF_bp;/* OverFlow Interrupt: disabled */
+//	TCB3.CTRLA = TCB_CLKSEL_DIV1_gc     /* CLK_PER */|1<< TCB_ENABLE_bp   /* Enable: enabled */|0<< TCB_RUNSTDBY_bp /* Run Standby: disabled */|0<< TCB_SYNCUPD_bp  /* Synchronize Update: disabled */|0<< TCB_CASCADE_bp;/* Cascade Two Timer/Counters: disabled */
+    
+    //ASYNC disabled; CCMPINIT disabled; CCMPEN disabled; CNTMODE FRQPW; 
+    TCB2.CTRLB = 0x15;
+
+    //DBGRUN disabled; 
+    TCB2.DBGCTRL = 0x00;
+
+    //FILTER disabled; EDGE disabled; CAPTEI enabled; 
+    TCB2.EVCTRL = 0x01;
+
+    //OVF disabled; CAPT enabled; 
+    TCB2.INTCTRL = 0x01;
+
+    //OVF disabled; CAPT disabled; 
+    TCB2.INTFLAGS = 0x00;
+
+    //Temporary Value
+    TCB2.TEMP = 0x00;
+
+    //RUNSTDBY disabled; CASCADE disabled; SYNCUPD disabled; CLKSEL DIV1; ENABLE enabled; 
+    TCB2.CTRLA = 0x01;
 }
 
 
-
+/*
 ISR ( TCA0_OVF_vect ) {
     cli();
     RPM_calculation();
@@ -35,14 +66,26 @@ ISR ( TCA0_OVF_vect ) {
     TCA0.SINGLE.INTFLAGS = TCA_SINGLE_OVF_bm ;
     
     sei();
+}*/
+
+ISR (TCB3_INT_vect){
+    uint16_t yo = TCB3.CNT;
+    printf("CNT %u", yo);
+    
+    uint16_t stewui = TCB3.CCMP; 
+    printf("CCMP %u", stewui);
+    
+    //TCB3.INTFLAGS = PIN0_bm;
+    
 }
 
+
+/*
 ISR(PORTD_PORT_vect){
-    cli();
+   // cli();
     falling_edge_counter ++;
     
     PORTD.INTFLAGS = PIN2_bm;
-    sei();
+    //sei();
-    
-    
 }
+ * */

prosjekt.X/main.c

@@ -27,15 +27,14 @@
 
 
 int main() {
-    
-    
-    sei();
     init_uart((uint16_t)9600);
     stdout = &USART_stream;
     TCA0_init ();
     PORT_init();
+     sei();
      
     while (1) {
+        //printf("loop")
         ;
     }
 }

prosjekt.X/nbproject/configurations.xml

@@ -13,6 +13,7 @@
                    displayName="Important Files"
                    projectFiles="true">
       <itemPath>Makefile</itemPath>
+      <itemPath>prosjekt.mc3</itemPath>
     </logicalFolder>
     <logicalFolder name="LinkerScript"
                    displayName="Linker Files"
@@ -38,8 +39,8 @@
         <targetPluginBoard></targetPluginBoard>
         <platformTool>nEdbgTool</platformTool>
         <languageToolchain>XC8</languageToolchain>
-        <languageToolchainVersion>2.46</languageToolchainVersion>
+        <languageToolchainVersion>2.45</languageToolchainVersion>
-        <platform>3</platform>
+        <platform>2</platform>
       </toolsSet>
       <packs>
         <pack name="AVR-Dx_DFP" vendor="Microchip" version="2.4.286"/>